Francés
Español
Português
العربية
Italian
Türk dili
Indonesia
ภาษาไทย
Việt
4060 Laser Cutter Engraver
1.There are three controller for your choise.M3/Lend lightburn/RD
2. Easy operation LED panel;
3. Long life metal Mo reflector mirror;
4. High torque stepper motors;
5. Double layers table aluminium blade &honeycomb optional
6.Gate sensor to protect Childer and opreater
7.water sensor to protect the laser tube
8.red dot and air assist on the laser head
9.Air pump for protect the lens ,and make cutting edge better
Cheap 4060 60w Co2 Laser Cutter Engraver
At the heart of the CO2 Laser Cutting Machine 460 is a sealed CO2 glass laser tube. The laser tube is filled with a mixed gas of CO2, nitrogen, and helium. When energized, the CO2 molecules undergo transitions between vibrational and rotational energy levels, generating infrared laser light with a wavelength of 10.6 microns.
The laser beam is transmitted through an optical path system composed of reflective mirrors and a focusing lens. The reflective mirrors guide the laser beam to the laser head, where the focusing lens converges the beam into a tiny spot with extremely high energy density. When this spot hits the surface of the material, it instantly melts or vaporizes the material. At the same time, the precision motion system drives the laser head or the worktable to move according to the pre-programmed path, achieving non-contact cutting or engraving of the material. The waste generated during processing is quickly removed by the exhaust system, ensuring a clean working environment.
Parameter point :
M3 Controller with software and dongle/Lend board support the lightburn/Ruida
Effective Working Area：400x600mm
Laser power: 50w
Motorized up down worktabel, red dot pointer.blade table
LED light, round inner rails on XY, imported lens,Water pump air
pump ,step motor ,exhaust fan installed.smoke pipes. plywood package
